Silver's NEOMAX Coilovers Subaru WRX 2008-2014

SS2006

Silver's NEOMAX Coilovers Subaru WRX 2008-2014

Regular price $1,299.00
  • Adjustable T6 6061 front camber plates on all applicable McPherson style applications.
  • Koyo Japan Radial Bearing upper spring perch standard on all applicable McPherson applications. This eliminates spring bind, noise, and gives improved driver feedback.
  • 24 levels of damping adjustability combined with our high grade shock oil, not only do you feel the click in your fingers, you feel every damping adjustment in the driver’s seat.
  • High strength JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless shock tube.
  • 44mm piston with digressive style valving characteristics provides maximum low speed damping response for ultimate performance while simultaneously giving a comfortable ride.
  • Mono-tube shock design, Increases shock oil capacity as well as displacement over twin tube designs for maximum performance.
  • High viscosity IP F.A. 5W damper oil ensures the best efficiency and consistency of shock-absorption and damping control.
  • Height adjustability is provided by the lower bracket which prevents the need to adjust the spring perch or preload, offering the maximum possible travel regardless of height setting.
  • Cold-bent springs made from high strength SAE9254 steel which keeps stable elastic modulus.
  • Powder coated steel lower brackets matching all factory brake line & ABS wire tabs, for seamless installation.
  • Anodized T6 6061 aluminum lower mounts for multi-link suspension systems to lower unsprung weight.
  • 5 Year limited manufacturer’s warranty.
Default Spring Rates: Front 8K Rear 8K

*photos may be generic and do not reflect actual product

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
'10 WRX HUGE improvement

Was running the OEM struts, which at least two blew out over the past couple months due to the wonderful work DOT does on the roads here in SW Washington. After quite some time researching, and speaking with William from Silver's, I settled on a set with 8k front and rear Swift springs.

Install on the rear was a bit of an adventure as you have to unbolt everything from the control arm to swap out the struts, and I 100% recommend disconnecting the swaybar on both sides from the start, otherwise bolts will bind up on ya. Front was a bit smoother, but again I recommend disconnecting the swaybar before unbolting the struts.

Ride quality is fantastic with dampers set 10 clicks down from full hard. The car feels way more stable, and planted. With the car lowered about 1.75" from OEM height, the rear has -2.5 degrees of camber, the front is almost dead on 0 degrees camber. Aftermarket RCAs will be needed for camber adjustment back there, so keep that in mind if you're concerned. Get an alignment to fix the toe in caused by the camber reduction and you won't have any problems.

Overall, I would 100% recommend these to any of my friends. The customer service alone is worth the purchase, the fact the product quality is great (at least for the first few hundred miles I've driven so far) is just a bonus. 10/10 quit hesitating and throw Silver's Suspension some of your hard earned cash!

J
Jeff C.
These are the best Coilovers EVER!

Installed on my WRX and completely transformed the ride for the better, I couldn't have built a better coilover myself!

THE ULTIMATE IN PERFORMANCE SUSPENSION
Est. 1999, Extensive Testing, Superior Knowledge

All of our coilovers are hand assembled and shock dyno’d to ensure you receive a high quality, reliable, and affordable product.

Our Story

In 1999 after years of racing time attack and constantly changing suspension setups realizing they all had major flaws. It became obvious there wasn’t a quality performance suspension on the market, Soon after with lots of trials and tribulations Silver’s was born. Silver’s combines both the passion for automotive racing and the knowledge of the industry. Silver’s was started with the performance comes first mindset, and to this day 19 years later it still stays true to that. Every kit is designed with track performance in mind, with equal focus on reliability.

Our Mission

We strive to bring you the best performing suspension at an affordable price. Every part of our coilovers is manufactured in our 36,000sqft state of the art facility. Our kits are hand assembled and every single shock is put on the dyno to ensure it is within the 5% variation we allow to pass. This is much lower than most manufacturers and there is no spot checking. Doing everything in house allows us to insure we have the best quality possible.

Contact Us

3200 Hanson St
Fort Myers, FL 33916
(239) 666-6929
sales@silvers-na.com
support@silvers-na.com

Mon - Fri, 9:30am - 6:00pm